How can copper ball mill polishing save time and improve quality?

The copper ball grinder is suitable for the grinding and polishing of large batches of medium, small and large-scale parts, and improves the work efficiency by 6~10 times. Rolling in the shape of a spiral vortex, the oscillating grinder is used to grind, cut or polish the surface of the workpiece, especially those that are susceptible to deformation or complex shapes, and the dead angle in the hole uses oscillation.

　　1. Do not drive the machine too fast when working to avoid bumping.

　　2. Do not use flammable liquids to wash the floor, or operate the machine in explosive air.

　　3. When operating the machine, do not lift the operating lever, which will cause the machine to lose control.

　　4. The machine must be placed indoors, and it should not be exposed to rain and snow, and the machine should not be sprayed with any liquid.

　　5. Do not press things on the machine, because it has a precise balance, when the operation needs to move the operation mark, it is necessary to move all the wires.

　　6. The bottom line must be connected with the switch box and motor, and the connection will cause electric shock and shock.

　　The copper ball mill has high-frequency oscillation, so that the workpiece is closely and evenly mixed with grinding stones or steel balls, abrasives, etc., and rolls in a spiral vortex. Or the shape is complex, and the work in the dead corner of the hole can be ground with an oscillating grinder to obtain uniform quality, and can be sampled at any time during processing, saving time and improving quality; The material selection area of the oscillating grinder is equipped with a conversion gate and filter. The mesh, etc. can separate the grinding object from the ground object, which is easy to select materials and simple to operate.

　　1. The principle of helical tumbling activity and three-dimensional oscillation is adopted to make the parts and the tumbling abrasive grind each other

　　2. The copper ball grinder is suitable for the grinding and polishing of large batches of medium, small and large-scale parts, and the work efficiency is improved by 6 to 10 times.

　　3. The processing process of copper ball grinding machine does not destroy the original size and shape of the parts.

　　4. The copper ball grinding machine can grind a lot of workpieces at one time, check the processing conditions of the parts at any time, complete automatic and unmanned operations, and the operation is convenient.